Please call us at 248-650-0603 Email Us:

Bushings and Mountings

Bushings & Mountings Collection

Rubber-Flex Bushings

Prepared in our ISO Certified Rochester Hills facility our Rubber Insulated Bushings are made with the finest natural rubber or synthetic elastomers to provide flexible solutions to the noise, vibration, shock, and misalignment problems inherent in most mechanical designs.

Our Molded Rubber Products - Rubber-Flex Bushings:

  • Save Investment Dollars – Can be Fabricated from Existing Tooling and Fixtures
  • Compensate for Mis-Alignment
  • Reduce Vibration
  • Provide Highest Fatigue Life, with Rubber in Compression and Shear Design
  • Absorb Shock
  • Sustain Very High Static and Dynamic Loads
  • Reduce Noise
  • Eliminate the Need for Lubrication
  • Reduce Maintenance

Rubber-Flex bushings are produced to your specifications at exceptionally low cost, even in small lots.  Inner and outer sleeves are separated by an elastomer wall that also holds them together with a strong bond.  The elastomer takes up all the movement without permitting the bonding surfaces to move.

Existing Tooling and Fixtures

Based on our experience, and the accumulation of tooling from prior years – there are many sizes we can offer which require only assembly – eliminating the expense of tooling.  We can also help you determine the least expensive approach to match your specific needs.

Choice of Materials Bushings

Bushing inserts can be supplied in virtually any metal – brass, steel (often case hardened for use on torsional bushings with end serrations for gripping), stainless steel, bronze (including porous bronze powdered metal bearings for lubrication), copper or plated metal – and plastics.  The outside diameter of the outer can of the bushing is often centerless ground to size to “press fit” into a receiving bore hole.

Elastomer selection is most often driven by the environment of the application.  Ozone exposure, severe cold or heat, exposure to oil, gas, diesel, or solvents must be considered.

Selecting the Correct Bushing

We offer free design assistance, and can help if you are designing a new product.  If you are looking towards systems integration to reduce the number of parts, attempting to solve specific application problems, or simply trying to reduce noise and vibration in an existing mechanism, we can assist to ensure your bushing design will meet all of the physical and mechanical requirements of the application.

The proper design takes into consideration radial, (both static and dynamic), axial, torsional and conical loads and their combined effects.  Plus cycle speeds and frequency of application, size and space limitations (shaft size/maximum O.D. / I.D., or length) and any abnormal environmental influences such as exposure to heat, cold, oil, and solvents.


Bushing Drawing of Applied Forces

Method of Manufacture

Beyond the choice between transfer, injection, or compression molding – it’s important to understand the physical and mechanical requirements of your application.  If you are considering a center bonded over mold, can your parts accept axial loading thru the bore? What radial loads are expected, and will a silent-bloc bushing handle the expected radial load of your application?  Will a fully mold bonded design hold up in a rigorous application – or should the part be pre-stressed to add durability and longevity in my application?  What is the best method of manufacture for reciprocating torsional force?

Contact us early-on in your project - Bushings Inc. can help with all of the above questions based on our 70+ years of experience.


Latest from our FAQ

What Our Clients Say About Us

Testimonial Image
"I want to take this opportunity to thank the Bushings Incorporated team that recently helped us get our automated assembly line up and running.  For years our line required our rubber insulated overmolds be manually inserted due to several failed attempts to get an automated press to properly insert the bushings.  The Bushings Incorporated team was able to help by working with our manufacturing engineers to develop fixtures, and procedures that were able to get the automated press up and running.

With the new press up and running, the consistency has been great, and the operator is very happy with the new process.  The operator says that the new press and fixturing is doing a good job at installing the bushings straight and consistent.  He has experienced no “mushrooming” or tearing of the bushings with the automated press (this was the reason for manually inserting them for so many years).  The operator also says that the job is much easier on him, and the production level is up due to the new process.

The help that was received to improve our process was above and beyond.  That kind of support is needed and appreciated, and while most vendors lack in their support, it is my feeling that Bushings Incorporated and their team have gone one step above.

Thanks again for the support!"

Steven A.
Engineering Product Manager
Motion Control Division


Our Company

Established in suburban Detroit in 1942, Bushings Inc. is an ISO 9001:2015 certified manufacturer of rubber insulated bushings, and marine/industrial engine mounts, with headquarters in Rochester Hills, Michigan.

Our rubber molded products, including engine mounts, rubber insulated bushings, and rubber overmolds are world class quality, and are specified by leading Original Equipment and Aftermarket Manufacturers.


Visit Bushings Inc.